Home > Exhibition > Content
Product Categories

Advanced Innovative Design Technology in Metal Briquette Machine

Wuxi Puxin Machinery Factory | Updated: Mar 24, 2018

The metal briquette machine is divided into vertical and horizontal type. The vertical metal briquetting machine is mainly used for packing waste paper and plastic mineral water bottles, while the horizontal metal briquetting machine has the advantages of packing scrap iron, scrap steel, stainless steel, etc. The remarkable effect is that it has the characteristics of high pressure, heavy weight and convenient loading.

 

In addition, these two types of metal briquette presses still have a lot in common. As a type of equipment specially manufactured for foundry manufacturers and scrap metal processing industries, metal briquette presses can cold-press scrap metal such as aluminum scrap. The weight of 2 to 6 kg of cylindrical cake is directly used in the furnace, simplifying the intermediate link.

 

The metal briquette machine adopts hydraulic transmission, fast no-load speed, simple structure, low failure rate, and stable operation. At the same time, it also uses international standard seals to ensure that users can continue to run without impairing the pressure of the oil cylinder, and is more durable.

 

Under the control of PLC, the metal briquetting machine realizes automatic control, more reliable operation, and saves a lot of manpower and material resources. In addition, it uses common hydraulic components on the market, so it is more convenient and quick for users to use and maintain.

 

In addition, due to the light weight and poor fluidity of aluminum scrap, the metal briquette press also uses a large vibratory hopper, which facilitates the dropping of aluminum scrap into the feed chute below the big hopper, which helps the feed cylinder to push out more aluminum scrap and reduce The number of feeds. At the same time, a cone-shaped hopper is used above the front briquetting mold to facilitate the flow of the aluminum chips and the excess aluminum chips will enter the next cycle with the pull-out of the punch and will not cause secondary pollution.

 

If the metal briquette machine is used together with the conveyor, it can also help to reduce the height of the feeding, greatly reducing the labor intensity of the workers, thereby increasing the work efficiency and achieving continuous block packing operations.

 

http://www.pxslitter.com/


Products
Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Feedback