Home > Exhibition > Content
Product Categories

Automatic Slitting Machine

Wuxi Puxin Machinery Factory | Updated: Aug 10, 2017

We should ensure that the voltage, current and hydraulic pressure are correct and stable before the automatic slitting machine is started. At the same time, before preparing to run, all staff should pay attention to maintain a safe distance with the equipment, to ensure their own safety. Before the equipment is put into operation, we must pay attention to check whether each job is properly adjusted, and whether it needs lubrication, whether it is filled with grease or not.

In the automatic slitting machine operation, be sure not to touch the running film roll or roller core, be careful not to use the knife or hard object to cut or cut each roller core when running. Next, we should pay attention to check whether the cutting tool of automatic slitting machine is sharp or not. Then you can run the empty car first and pay attention to check if there is any abnormality.

Automatic slitting machine equipment in after work, need timely adjustment according to the condition of production equipment to maintain the best working conditions, but also to ensure that the machine cutting indentation is moderate, no burr, to ensure its proper position on both sides of the trimming.

Automatic slitting machine

If you are interested in our products, please contact us!
Wuxi Puxin Machinery Factory
Contact: Peijun Guo
Mob: +86-13951579100
Tel: +86-510-83208381
Fax: +86-510-83209882
Add: 76# Qianluo Load, Huishan District, Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Website: http://www.pxslitter.com

Products
Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Feedback