Hydraulic Lift Table Considerations
The hydraulic lift table can be customized according to the user's requirements, and is currently working at heights in various factories, automatic warehouses, parking lots, municipalities, docks, construction, decoration, logistics, electric power, transportation, petroleum, chemicals, hotels, gymnasiums, and industrial and mining industries. It is often used in maintenance and repairs. Because the lifting platform is driven by hydraulic pressure, it is called a hydraulic lifting platform.
The hydraulic lift table has strong adaptability and can be used in different work situations. At the same time, it can also configure various types of countertops, such as balls, rollers, turntables, steering, tilting, telescopic, etc., and then cooperate with various control methods to meet different requirements. Job requirements.
The hydraulic lifting platform also has the advantages of stable and accurate lifting, frequent start-up, large load capacity, etc. For the user, it effectively solves the difficulties of various lifting operations, making production operations easy. In the actual operation, we also need to pay special attention to security issues.
First of all, before working, it is necessary to carefully inspect the various components of the hydraulic lifting platform, especially to see if each of the fastening bolts is good and reliable. In addition, check whether there is any leakage in the hydraulic piping components and whether the wire contacts are loose or damaged.
Second, before the hydraulic lift table is lifted and lowered, its four-cornered legs need to be placed. Usually it is required to be supported on a solid ground and the worktable surface is adjusted to a horizontal state. Then turn on the power and the indicator light should be on. Then the motor is started, the oil pump works, and it is raised and lowered once or twice under no-load conditions, and the work is started after checking the normal operation of each part. When the temperature is lower than 10°C, the oil pump should be operated for 3-5 minutes to confirm that the oil pump is working properly.
Remember that if you find that the hydraulic lifting platform is abnormal and it is not working properly, you need to cut off the power supply in time for maintenance. It is forbidden for the equipment to be sick. Non-professionals are not allowed to dismantle the hydraulic components and electrical components of the hydraulic lifting platform.