Home > Exhibition > Content
Product Categories

Operation Flow of slitting machine

Wuxi Puxin Machinery Factory | Updated: May 24, 2017

The operation procedure of slitting machine:
Start circulating water: Start the cold water cycle and check that it works.
Turn on the power supply: Confirm the power LED, start the motor, let it run 30 seconds to 1 minutes, during the period to see if the motor is operating normally, there is no other sound.
Point operation: The operation of the point, close the tool holder, and check the edge of the case and the fastening of the bolt, and then press the material.
Continuous or single operation: Select a continuous or single operation, and then press the shear switch to do the cutting operation, in case of sudden situation, you can press the emergency button. When cutting, on the side of the material is strictly prohibited.

Products
Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Feedback