Home > Exhibition > Content
Product Categories

Steel coil slitting machine characteristics and maintenance

Wuxi Puxin Machinery Factory | Updated: Mar 12, 2018

The steel coil slitting machine mainly divides the large roll parent roll into products of different widths, and can have the effect of checking the quality of the product. It has many obvious features, such as a high-precision roll-off photoelectric correction device. And manual, automatic two control modes, the user can be selected according to the actual situation.

 

At the same time, the steel coil slitting machine has two winding methods for slitting coils, namely surface coiling and center coiling. The tension of the retracting coil adopts automatic tension control, and the control method also has tension feedback control and taper control. This is a manifestation of device flexibility and strong adaptability.

 

The coil slitting machine is equipped with two kinds of slitting tools such as circular knife cutting and air knife cutting to ensure reliable quality and convenient adjustment. It also has a function of automatic stop of fixed length, accurate cutting length as far as possible, and trimming device. The use of cutting edge material produced by the fan. Such a slitter is very suitable for slitting all kinds of thin strips.

 

In addition to knowing the characteristics of the steel coil slitting machine, it is necessary to master its daily maintenance work. Since it is accomplished by a slitter and a cross cutter, high-quality slitters and cross cutters must be used. The basic principle of daily maintenance of the equipment is smooth, clean, liquidation in place to ensure that the sliding parts of the equipment are in good condition.

 

Especially for the rotating parts of the coil slitter, regular adjustments are made, regular changes are made, and the commutator is carefully documented to extend the life of the equipment. If the equipment is disabled for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the entire machine.

 

http://www.pxslitter.com/


Products
Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Feedback