Home > Exhibition > Content
Product Categories

Common classification of Kaiping machines

Wuxi Puxin Machinery Factory | Updated: Jul 11, 2017

Most of the steel plate is manufactured in the form of steel coils, and the Kaiping machine is a machine that processes steel coils into steel plates, also known as cross shear equipment. Kaiping equipment mainly plays two roles, one is shear function, and the other is leveling function. Stainless steel on the surface of higher requirements, so the stainless steel equipment in Kaiping requirements are higher.


cut to length line

On the market, the common Kaiping machine can be roughly divided into three kinds according to the processing capacity: medium plate Kaiping machine, thin plate Kaiping machine and precise Kaiping machine, which can basically meet all kinds of processing requirements.

Medium plate Kaiping machine is a kind of equipment specially used for processing hot rolling rolls. The general processing capacity is 3mm to 14mm. The early plate Kaiping machine can only open the maximum width of 1500mm hot-rolled coil, with the introduction of wide hot rolled coil, in recent years, each processing center on the hot rolling mill in Kaiping can generally open 2000mm wide hot-rolled coil. Part of the hot Kaiping machine also has cutting edge function.

Thin plate Kaiping machine can generally process 0.3mm to 3.0mm thickness of cold-rolled coil. In the early stage, the thin plate Kaiping machine can only process the cold rolling coil with the biggest width of 1300mm, but with the extensive application of 1500mm cold rolled coil, the 1500mm width Kaiping machine soon occupied the market. The processing capacity of cold rolling mill in Kaiping is mainly embodied in leveling, surface protection, stamp and so on.

Precision Kaiping generally refers to the processing of the maximum width of 800mm cold-rolled coil of Kaiping machine, processing thickness of 0.3~3.0mm. As with thin plate, it mainly processes cold rolled coils of high requirement, especially for surface protection. Generally, the products are made of fixed sheets. They are widely used in stamping, precision cutting and so on.


hydraulic upenders

Wuxi Puxin Machinery Factory
Contact: Peijun Guo
Mob: +86-13951579100
Tel: +86-510-83208381
Fax: +86-510-83209882
Add: 76# Qianluo Load, Huishan District, Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Website: http://www.pxslitter.com

Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com