Home > Exhibition > Content
Product Categories

How to Maintain The Cut To Length Line

Wuxi Puxin Machinery Factory | Updated: Aug 07, 2017

Maintenance is a very important link for the mechanical equipment. The maintenance can not only improve the work efficiency, but also prolong the service life of the equipment and reduce the cost of equipment.

After the end of Kaiping, do "work finished, the site clean", and do a good job of cut to length line maintenance work, and promptly shut down the power supply. Any butter mouth place, a month with a butter, maintenance or refueling, must ensure that the cut to length line power supply is completely cut off, mainly on bearing lubrication, pay attention to the roll surface cleaning, the welding slag is not allowed, such as plate material or other things fall between rolls, so as to avoid damage to a flat roll.

In the use of the process to operate strictly according to cut to length line processing program and artificial methods, also need to pay attention to whether there are people too close to the machine, if it is found that the phenomenon of irregular noise, such as the impact of abnormal, should immediately stop check.

Cut to length line.jpg

If you are interested in our products, please contact us!
Wuxi Puxin Machinery Factory
Contact: Peijun Guo
Mob: +86-13951579100
Tel: +86-510-83208381
Fax: +86-510-83209882
Add: 76# Qianluo Load, Huishan District, Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Website: http://www.pxslitter.com

Products
Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com
Feedback