Home > Exhibition > Content
Product Categories

Receipt and cutting accuracy of hydraulic steel coil slitting line

Wuxi Puxin Machinery Factory | Updated: Jul 07, 2018

In the process of operation, the hydraulic steel coil slitting line needs to effectively cut the whole coil or the whole raw material for fixed length slitting. The hydraulic steel coil slitting line needs to be fixed length, and can be used in the process of slitting control. Effectively divided into static and dynamic.

The most important performance of the fixed length slitting of the hydraulic steel coil slitting line mainly refers to the cutting precision, and the finished product length is consistent. The slitting length can be set continuously during operation, if the actual slitting length has errors. It is easy to calibrate by setting parameters.

Receipt of hydraulic steel coil slitting line

1. During operation, when the machine is stopped during the winding process of the inner and outer ends, the unloading button can be effectively used to effectively place the film on the prepared unloading trolley, which can be cut during operation. The film is sealed with a sealing tape.

2. The hydraulic steel coil slitting line needs to use the clamp to loosen its button to release the chuck, check whether the film core of each film leaves the paper core, and manually remove the film roll if one is still stuck on the paper core.

3. When the hydraulic steel coil cutting line needs to ensure that all the diaphragm open chucks are placed on the trolley during operation, effectively use the film loading button to raise the winding arm, install the corresponding paper core, and attach the film to the paper neatly. On the core, the next slitting is performed.


Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com