Home > Exhibition > Content
Product Categories

Structure and characteristics of CNC slitting unit

Wuxi Puxin Machinery Factory | Updated: Jan 15, 2018

CNC slitting unit, which is mainly used for longitudinal slitting of metal materials such as silicon steel sheet, strip and aluminum strip. The technical parameters of this unit are: material thickness, unwinding width and weight, unwinding inside and outside diameter, winding diameter, slitting parallel error, cutting width error, speed control mode, speed, and equipment total power and area The area of these two. These are all important parameters, therefore, are indispensable.

In addition, the unit is fully hydraulic drive and gas-up splitter. In operation, because of the use of PLC control, so it is automatically run, and automatically adjust the slitting width to make it suitable.


CNC slitting unit features are as follows:

(1) In the cutting, the two jobs of tool change and row cutting are carried out without disassembling the cutter shaft. As a result, the automation of the equipment is highly automated and easy to operate, with larger values at the shear rate.

(2) It is to cut the raw materials vertically, to get the desired width of the various finished products, and can be used as a preparation process for some blank. In addition, the use of different tools, can be a variety of non-ferrous metal materials for cutting. Because, CNC slitting unit is for automatic operation, therefore, equipment efficiency, can be guaranteed.


Slitting series
Leveling series
Flat steel series
Coil upender
Contact Us
Tel: +86-510-83208381
Mob: +86-13951579100
Add: 76# Qianluo Load, Huishan District,
Wuxi, Jiangsu, China
Email: wxpx0510@163.com