Thick plate Kaiping use attention points and applications
1. Plate Kaiping machine in use, whether there are some precautions?
Plate Kaiping machine, the use of the process, there are some precautions, mainly for: If you find an exception, or the impact of such anomalies, then it should immediately shut down for maintenance. If it is not an emergency, then it is forbidden to stop using emergency stop button. In addition, the power of the equipment, it is forbidden to pull off without authorization.
2. In the use of the range, open-plank machine is smaller than ordinary Kaiping machine?
Kaiping machine, the Kaiping thickness is 0.18-25mm, cross cut to size tolerance is within 0.1mm. Therefore, it can be processed in the thickness range, is 0.14-25mm. The plate Kaiping machine, which is Kaiping machine in a. The main target is for thick plate, so its processing range, is smaller, it is impossible with ordinary Kaiping machine, is the same.
3. Kaiping aluminum, can we use the plate Kaiping machine? In addition, steel open Kaiping it?
Kaiping aluminum can be used Kaiping machine to carry out, however, whether or not to use thick Kaiping machine, it is to see the actual situation and the use of the requirements. If necessary, then, is available, in general, you can use ordinary Kaiping. The Kaiping steel, steel bar is rolled straight, it will be used to Kaiping machine. However, this is not the use of plate Kaiping machine.
4. Plate Kaiping machine, if the correction center and the center of the uncoiler does not overlap the direction of the center, then the plate Kaiping, whether it has an impact?
Plate Kaiping machine, if the correction center and the center of the uncoiler does not coincide with the direction of the center, then the plate Kaiping, there is not much impact, because the correction wheel by clamping force, the plate can prevent the phenomenon of deviation occurs . However, if it is on the sheet, there will be problems.